Precise Positioning: Use the spot welder to accurately tack parts in place.
\nNecklace Welding: Weld necklaces with a diameter of 0.3mm or larger (smaller diameters may melt).
\nRepairs: Easily repair metal joints or breaks without removing set stones or pearls.
\nHeat-Sensitive Metals: Repair heat-sensitive metals or metal alloys.
\nMolding Repairs: Repair the surface or entry points of molds made from the same alloy.
\nNo Fluxing Needed: The inert argon atmosphere allows welding without fluxing, providing a smooth soldering point that does not require scaling or scale removal.
\nInstallation and Setup:
\nElectrode Connection: Connect the black wire to the black connection (ground\/cathode) and the red wire to the red connection (positive\/anode).
\nArgon Gas: Connect the argon gas via the pressure reducing valve, and adjust the gas pressure to the minimum setting.
\nTungsten Needle Preparation: Sharpen the tungsten needle on a grinding wheel, or use a Fordham flex shaft or Dremel tool with an abrasive disk. Avoid using wheels previously used for grinding iron\/steel, as this can contaminate the needle and lead to uneven sparks or weld results.
\nNeedle Installation: Ensure the tungsten needle extends approximately 5mm from the welding head, with a needle diameter of 0.1mm.
\nOperating Steps:
\nPower On: Plug the device into the wall socket and turn it on.
\nAdjust Current: Start by setting the current regulating dial to 1-1.5. The dial ranges from 1-8, and you can adjust the current flow based on the best results for your target material.
\nCheck Gas Flow: Ensure gas is flowing over the tungsten tip by feeling it with your finger. Adjust the gas until you can just feel the flow.
\nWelding Setup: Clamp the object to be welded with the negative ground electrode. Do not allow both the tungsten needle and the ground clamp to contact the workpiece simultaneously, as this could cause a short circuit. Maintain a 0.5mm arc gap for optimal pulse welding.
\nEye Protection: Wear arc welding eye protection and cover exposed skin with a shirt or gloves to avoid burns from UV radiation.
\nFoot Pedal Operation: Briefly step on the foot pedal and release. The arc will pulse and spot weld at the point where the tungsten electrode is placed.
\nSpecifications:
\nPower Supply Options: 110V or 220V
\nPower: 400W
\nWelding Ampere: 0.5 \u2013 50A, continuously adjustable
\nWeight: Approx. 5kg
\nDimensions: 340 * 320 * 320mm
\nNote: Please specify your desired power supply when making a purchase.<\/p>\n
Important Safety Instructions:
\nFoot Pedal Usage: Do not step on the pedal for long periods. Step once and release immediately. Prolonged pressure can cause a short circuit, damaging the internal circuitry.
\nPrecision Equipment: Handle this machine with care to ensure optimal performance.
\nEye Protection: The spark during welding emits harmful UV radiation, which can cause eye injuries. Always use proper eye protection.
\nAvoid Touching Metal Parts: When stepping on the foot pedal, do not touch the tungsten needle or soldering metal part to avoid electric shock.
\nDisassembly Warning: Do not attempt to disassemble the unit without professional guidance.
\nPackage Includes:
\n1 x Welder
\n1 x Foot Pedal
\n1 x Cable
\n1 x Forceps Clamp
\n1 x Tungsten Needle
\nThis Jewelry Spot Welder is the perfect tool for jewelers and professionals looking for precision, reliability, and ease of use when welding precious metals and alloys.<\/p>\n","protected":false},"excerpt":{"rendered":"